TX-SR706
Home Theater - Onkyo
Full High-Def A/V Home Theater with 1080p Video Upscaling, New THX® Select2 Plus Certification and Signature Amplification
In the mid-range category, credibility is gained through exceptional performance and a high degree of functionality.There’s no better example of this than the THX Select2 Plus Certified TX-SR706 A/V receiver.With a certified amplification design and ability to process full high-definition audio and video, the TX-SR706 marks the boundary between cost effectiveness and high-end functionality. Look to some notable firsts at this level: (1) The ability to scale all sources, such as standard DVD, up to 1080p video with the industry recognized quality of Faroudja DCDi Cinema™; (2) an efficient push-pull amplification design originally created for Onkyo's high-end receivers; and (3) THX® Loudness Plus™ technology to maintain the impact of home theater even at low volume.To cap off a remarkable home entertainment component, we’ve also included RIHD (Remote Interactive over HDMI) system control; advanced Audyssey room acoustic correction technologies; and XM® and SIRIUS™ Satellite Radio and iPod® connectivity options. .
Special Features
- THX Select2 Plus Certified
- HDMI V1.3a repeater (4 in/1 out, 1080p compatible)
- HDMI 1080p upscaling powered by Faroujda DCDi Cinema
- Audyssey MultEQ for Room Correction and Speaker Calibration
- Audyssey Dynamic EQ for Loudness Correction
Product Features
Amplifier | |
| # Channels | 7.1 |
| Power (8ohms 20-20kHz 0.08%) /Ch | 100W |
| Power (8ohms 20-20kHz 0.05%) /Ch | - |
| Power (8ohms 1kHz 0.7%) /Ch | 115W |
| THX Certified |  (Select2 Plus) |
| Continuous 6ohms Rated | |
| Certified 4ohms performance | |
| High Instantaneous Current Capability | 36A |
| Amplifier Frequency Response | 5Hz-100kHz |
| S/N Ratio (LINE IN) | 106dB |
| All Discrete Circuitry | |
| Absolute Ground Plate | |
| Dual PUSH-PULL Design | - |
| Independent Block Construction (Amp/Preprocessor) | - |
| Toroidal Transformer | - |
| Independent Power Supply | - |
| Optimum Gain Volume | - |
| Linear Optimum Gain Volume | |
| Non-Scaling Configuration | |
| Bi-amp Capability For Front | |
| BTL Capability For Front | - |
Processing | |
| DOLBY Decoder | DD Plus, TrueHD |
| DTS Decoder | DTS-HD Master Audio |
| Neural Surround | - |
| THX Processing Mode | - |
| DSD Processing/Direct Mode | / - |
| Direct/Pure Mode | / |
| Music Optimizer | |
| Audyssey Dynamic EQ | |
| 192K/24 Bit DACs | |
| VLSC | - |
| DSP Type / QTY | 32 BIT / 2 |
| Adjustable Crossover | 40/50/60/70/80/90/100/120/150/200Hz |
| Independent Crossover | (LR, C, SR, SB) |
| AV Sync | |
| Accurate Speaker Distance Setting | |
| Multi-Band Speaker EQ | 5 Band |
Connectivity | |
| Audio I/O | 8 / 2 |
| Balanced Audio Output | - |
| Balanced Audio Input | - |
| Phono Input | |
| Digital Audio IN (OPT/COAX) | 3 / 2 |
| Digital Audio OUT (OPT/COAX) | - |
| Composite I/O | 5 / 1 |
| S-Video I/O | 5 / 1 |
| Front-Panel A/V | L / R / V / S |
| Front-Panel Optical | |
| Component Video / Bandwidth | 2 / 1 / 50MHz |
| HDMI I/O | 4 / 1 |
| HDMI Version | V1.3a Repeater |
| HDMI Bandwidth | 1080p |
| HDMI Deep Color Capable (36bit) | |
| Component Video Upconversion | - |
| Analog to HDMI Upconversion | |
| 480i to 480p Processing | (DCDi Cinema) |
| 1080i Upscaling | (DCDi Cinema) |
| 1080p Upscaling | (DCDi Cinema) |
| Multi-Channel Input | 7.1 |
| Surround Pre-Outs | 7.1 |
| Speaker A/+B | - |
| Powered Zone2 | |
| Zone 2 Line Out | |
| Zone 2 Video Out | - |
| Zone 3 Line Out | - |
| iPod Ready | (DS-A2x, DS-A2, DS-A1) |
| Built-in HD Radio Tuner | - |
| XM Radio Ready | X * |
| SIRIUS Radio Ready | X * |
Integration Access | |
| RS-232 | |
| IR Input | |
| Ethernet | - |
| ONKYO-RI System Control | |
| 12V Trigger | (Zone2) |
Miscellaneous | |
| Pre-Pro/Learning Remote | / |
| Back-Lit Remote | - |
| Glossy Black finished Remote | |
| Simple Remote to change input & mode | |
| Color-Coded Speaker Terminals | |
| Auto Speaker Calibration W/Mic. | (Audyssey MultEQ) |
| OSD Out | |
| Input Name Edit | |
| Permanent Memory Storage | |
| Solid Aluminum Front | |
| Detachable AC Cord | - |
| Warranty | 2 YEARS |
Product Specifications
Amplifier Section | |
| Power Output | - |
| Front L/R | 100 W + 100 W (8 ohms, 20 Hz–20 kHz, 0.08%, 2 channels driven, FTC) |
| Center | 100 W (8 ohms, 20 Hz–20 kHz, 0.08%, 2 channels driven, FTC) |
| Surround L/R | 100 W + 100 W (8 ohms, 20 Hz–20 kHz, 0.08%, 2 channels driven, FTC) |
| Surround Back L/R | 100 W + 100 W (8 ohms, 20 Hz–20 kHz, 0.08%, 2 channels driven, FTC) |
| Dynamic Power | 240 W (3 ohms, 1 ch) 210 W (4 ohms, 1 ch) 120 W (8 ohms, 1 ch) |
| THD (Total Harmonic Distortion) | 0.08% (Rated power) |
| Damping Factor | 60 (Front, 1 kHz, 8 ohms) |
| Input Sensitivity and Impedance | 200 mV/47 k-ohms (Line) 2.5 mV/47 k-ohms (Phone MM) |
| Output Level and Impedance | 200 mV/470 ohms |
| Phono Overload | 70 mV (MM, 1 kHz, 0.5%) |
| Frequency Response | 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode) |
| Tone Control | ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) |
| Signal-to-Noise Ratio | 106 dB (Line, IHF-A) |
| Speaker Impedance | 4 ohms–16 ohms or 6 ohms–16 ohms |
Video Section | |
| Input Sensitivity/Output Level and Impedance | - |
| Video | 1 Vp-p/75 ohms (Component and S-Video Y) 0.7 Vp-p/75 ohms (Component PB/CB, PR/CR) 0.28 Vp-p/75 ohms (S-Video C) 1 Vp-p/75 ohms (Composite) |
| Component Video Frequency Response | 5 Hz–50 MHz (-3 dB) |
Tuner Section | |
| Tuning Frequency Range | - |
| FM | 87.5 MHz–107.9 MHz |
| AM | 530 kHz–1,710 kHz |
| FM/AM Preset Memory | 40 stations |
General | |
| Power Supply | AC 120 V-, 60 Hz |
| Power Consumption | 5.9 A |
| Dimensions (W x H x D) | 17 1/8" x 6 7/8" x 14 13/16" (435 x 174 x 377 mm) |
| Weight | 26.9 lbs. (12.2 kg) |
